singlecrystal diamond tool 、Monocrystal diamond tool、CVD tool
Polycrystal diamond tool, Polycrystalline Cubic Boron Nitride)
News >>CBN cutting parameters
CBN cutting parameters

X = particularly suitable for
O = qualified for

Milling at the Feed units = mm / tooth

Please note:
If the knife into the small and between 0.03 to 0.05, and also relatively shallow depth of cut in between 0.1 to 0.2, but the higher cutting speed, then the tool will significantly shorten the life.

Copyright © 2008 Superhard Tools Co.,Ltd All rights Reserved.
Tel:86-021-67687176 Fax:86-021-67687177 Address:No.7 XinGeRoad 850